Rotomoulding Mould Manufacturer In Ahmedabad

Mould specifications
Moulds will be fabricated from recommended and graded 2 or 3 mm sheet as per customer demand.
We shall prepare and provide AutoCAD Drawing in 2D/ 3 D for your final approval.
All moulds will be equipped with reverse engraved logo plates, LTR capacity and Instructions as per customer's requirements.
Threaded Manhole rings for all moulds will be made as per regular or customized design and dimensions.
All inside corner radius will not be less than 10 mm and joint will be avoided at corners.
Parting lines will be made from properly leveled and matched flat bars or from plates. They will be without undercuts and properly matched with set pins.
All the welded joints will be properly finished as same as mould surface.
No dent, scratches or hammer marks will be observed.
Mirror polished inside mould surface.
If customer requires, then External surface of the mould will be painted with high resistance anticorrosion Black/ silver paint or may be with buffing.